Microsoft Windows Phone – “0x89731812”

0x89731812

The above error message appears when you try to deploy a Windows Phone Project to a physical Windows Phone device.

Cause:
Connection to device failed.

Solution:
Disconnect and Reconnect the USB Cable, verify that Zune running and unlock the screen.

Did my solution solve your problem? Leave a reply.

HOW TO change Lock Screen (Sleep mode) settings on HTC Touch 2

  1. Tap Start > Settings > System > Power.
  2. Tap the Advanced tab.
  3. To change the time before the phone goes into Sleep mode, select a time from the Turn off device if not used for lists.
    (To turn off automatic Sleep mode altogether, clear the Turn off device if not used for check boxes.)

Council not to disable this feature, but simply to increase the interval for bringing it to 3-5 min on battery power only.

Finally, from the same screen you can increase the range of the backlight, the voice  where it says “Turn off backlight if device is not used for”.
The default setting is 30 s. If the user prefers is also possible to increase this range, always for the “On battery power”, however, do not recommend to put values ​​above 1 min since this approach affects the duration of the charge of the battery.

Did my HOW TO help you?

Microsoft Windows Phone – “0x89740006”

0x89740006

The above error message appears when you try to deploy a Windows Phone Project to a physical Windows Phone device.

Cause:
Lock Screen is active on phone

Solution:
Unlock the screen on your Windows Phone-based device

Did my solution solve your problem? Leave a reply.